Sony Ericsson W910i disassembly

1) Remove the back cover and battery. Slide the slider up and you be
able to access two screws in the battery compartment. There are also two
screws hidden under two plastic stickers at the top of the slide. There
are three other screws but they don't need removing to change the LCD.
Just remove the circled screws

Sony Ericsson W910i disassembly W9101

2) You can now remove the front cover. Run your fingernail along the
edge of the cover to unclip it from the rest of the phone

Sony Ericsson W910i disassembly W91022

3) Your phone will now be in two parts, like below. Remove the circled
screw

Sony Ericsson W910i disassembly W91032

4) You can now lift the LCD from the phone. Part of the keypad contacts
will still be attached by a ribbon which connects like a plug and
socket. Simply lift it upward to unplug the ribbon

Sony Ericsson W910i disassembly W9104

5) You can now replace the LCD. Note that the keypad contact part
was also attached to the phone by two ribbons (circled) which need to be
re-attached. Reverse the whole procedure for reassembly

Sony Ericsson W910i disassembly W9105

» Sony Ericsson W910i Reparationsvideo
» Schematics for sony ericsson w910i
» Sony Ericsson W910i Service Manual 2
» Sony Ericsson W910i Service Manual
» Sony Ericsson K610i disassembly